H. Häberli AG

News

Thomas Uebelhart

Our new employee in production area

We are very pleased to present you on this way with Mr. Thomas Uebelhart (1987), our new face at H. Häberli AG as a reinforcement in our team. Mr. Uebelhart started his work in production department 4 on April 1^st, 2024. After completed training as a polymechanic, he gained extensive experience in programming and setting up CNC Swiss-type lathe.

We wish Mr. Uebelhart a lot of success in executing his new role and look forward to work with him.

Itaya PC-8B

In March 2024, the new Itaya PC-8B CNC compression spring machine was successfully put into operation. This state-of-the-art machine offers a range of features that expand and enhance our production capabilities, including:

Fully electronic control of 5 axes for precise and versatile machining capabilities.
The wire diameter range is from Ø 0.1 to 0.8 mm.
The maximum outer diameter is 25 mm.
A visual length measuring system that ensures precise monitoring of the spring lengths during the production process.
The machine is equipped with a pneumatic system for horizontal movement during cutting.

Wafios FMU-16

In November 2022, the new Wafios FMU-16+ CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 24 CNC axes
Full-HD Multi-Touch monitor (min. 21.5")
8 programmable CNC axes
Wire diameter range Ø 0.40 to 1.60 mm
Wire infeed speed max. 140 m/min.
High user-friendliness

MicroStudio PMZ-DC1-300

In February 2022, the new MicroStudio PMZ-DC1-300 load tester was put into operation. This automatic spring load tester is especially suitable for measuring in static and dynamic mode for lenght and force of tension- and compression springs. Technical details see below:

Equipped with industrial PC in Windows 10 enterprise
Sofware "Pminterface" and Pmar 8.1" for statistical analysis of the measurement results
Equipped with 2 independent load cells (30 Newton and 300 Newton)
Automatic compensation of the deformation of load cells
Measuring range 0,2 - 300 Newton
Load resolution 0,001 N and 0,01 N
Max. spring outside diameter 38 mm
Max. spring length 300 mm

Aaron Sperisen

Our new employee in production area

We are very pleased to present you on this way with Mr. Aaron Sperisen (1996), our new face at H. Häberli AG as a reinforcement in our team. Mr. Sperisen started his work in production department 5 on October 3^rd, 2022. After completing his apprenticeship as a polymechanic, he earned a technical maturity while working. In addition, he was able to gain experience in toolmaking and later in AVOR & purchasing. Currently he is doing a B.Sc. in Business Engineering.

We wish Mr. Sperisen a lot of success in executing his new role and look forward to work with him.

Nicole Häberli

Our new employee in administration area

We are very pleased to present you on this way with Mrs. Nicole Häberli (1984), our new face at H. Häberli AG as a reinforcement in our team. Mrs. Häberli started her work in administration department on August 2^nd, 2021. By the way, she is the daughter of the current company owner and CEO. After completed her studies as a teacher, she has been working as a teacher since 2006 and initially taught at a comprehensive school in Jura. Mrs. Häberli has made her wide-ranging knowledge available to the Bachtelen Special Education Center. As additional and connectedness, Mrs. Häberli starts her new job in the administration area.

We wish Mrs. Häberli a lot of success in executing her new role and look forward to work with her.

Daniel Häberli

Our new employee in production and management

We are very pleased to present you on this way with Mr. Daniel Häberli (1990), our new face at H. Häberli AG as a reinforcement in our team. Mr. Häberli started his work in production on May 1^st, 2020 and will join the management later. By the way, he is the son of the current company owner and CEO. After completed training as a polymechanic, he gained extensive experience in programming and setting up CNC Swiss-type lathes. He also has in-depth knowledge in production of high-quality supplier parts for the medical and aerospace industries, as well as in 3D measurement technology. Mr. Häberli has also successfully completed an advanced education as a qualified technician in HF mechanical engineering.

We wish Mr. Häberli a lot of success in executing his new role and look forward to work with him.

Dario Giombanco

Our new employee in logistics

We are very pleased to present you on this way with Mr. Dario Giombanco (1986), our new face in the logistics department in our team. Mr. Giombancoc has started his work on February 1^st, 2020 at H. Häberli AG. After completed training as a spare parts seller in the automotive Industry, he has developed a lot of experience in warehouse management. Mr. Giombanco has also successfully completed an advanced education as a Quality technician.

We wish Mr. Giombanco a lot of success in executing his new role and look forward to work with him.

Lucia Rocchetta

Our new employee in administration area

We are very pleased to present you on this way with Mrs. Lucia Rocchetta (1986) our new face in the administration area in our team. Mrs. Rocchetta has started her work on Mai 15^th, 2019 at H. Häberli AG. After completing her vocational training as a businesswoman, she gained a lot of experience in export processing. Ms. Rocchetta has also successfully completed her education as an export specialist..

We wish Mrs. Rocchetta a lot of success in executing her new role and look forward to work with her.

Wafios FMU-08

In February 2019, the new Wafios FMU-08 CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 20 CNC axes
8 programmable CNC axes
Wire diameter range Ø 0.16 to 0.80 mm
Wire infeed speed max. 120 m/min.

Itaya AX-3

In January 2018, the new Itaya AX-3 CNC coiling and bending machine was put into operation. This machine offers:

Full electronic control of up to 9 CNC axes
Wire diameter range Ø 0.05 to 0.30 mm
Operational range of wire feed (axe F) 0 - 9999,98 mm
AX-3 is qualified for tension springs as well

Itaya RX-20B

In December 2016, the new Itaya RX-20B CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 15 CNC axes
Wire infeed speed max. 82 m/min.
Wire diameter range Ø 0.50 to 2.00 mm
Integrated camera measuring device including sorting chute

Wafios FMU-16

In September 2015, the new Wafios FMU-16 CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 24 CNC axes
11 programmable CNC axes
Wire diameter range Ø 0.40 to 1.60 mm
Wire infeed speed max. 120 m/min.

Itaya CX-2A

In September 2014, the new Itaya CX-2A CNC micro - compression spring machine was put into operation. This machine offers:

Full electronic control of up to 8 CNC axes
Wire diameter range Ø 0.03 to 0.20 mm
Max. external spring diameter Ø 10 mm
Wire infeed speed max. 122 m/min.
Integrated digital video camera as a measuring device for spring length and diameter

Thomas Marrer

Our new employee in the production area

We are very pleased to present you on this way with Mr. Thomas Marrer (1984) our new face in the production area 7 in our team. Mr. Marrer has started his work on December 1^st, 2013 at H. Häberli AG. After completed training in poly mechanician, he has developed a lot of experience in CNC-lathes. In addition to fulfilling its operational tasks, Mr. Marrer visits the HFTM (Higher College of Technology Central Plateau).

We wish Mr. Marrer a lot of success in executing his new role and look forward to work with him.

Wafios FMU-2.7

In March 2013, the new Wafios FMU-2.7 CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 24 CNC axes
11 programmable CNC axes
Wire diameter range Ø 0.80 to 2.50 mm
Wire infeed speed max. 120 m/min.

Kamatech G30

In October 2012, the new Kamatech G30 spring end grinding machine was put into service. This machine offers:

Through-feed and down-feed grinding
Wire diameter up to Ø 1.5 mm for through-feed grinding
Wire diameter up to Ø 4.0 mm for down-feed grinding
Max. spring length up to 250 mm
Adjustable loading plate axis
Loading plate up to 420 mm

Simplex MC 30

In April 2012, the new Simplex MC 30 CNC compression spring machine was put into operation. This machine offers:

Full electronic control of up to 7 CNC axes
Wire diameter range Ø 0.40 to 3.00 mm
Max. external spring diameter Ø 60 mm
Wire infeed speed max. 120 m/min.
Integrated digital video camera as a measuring device for spring length and diameter

Wafios FMU-0.7

In June 2011, the new Wafios FMU-0.7 CNC coiling, twisting and bending machine was put into operation. This machine offers:

Full electronic control of up to 24 CNC axes
11 programmable CNC axes
Wire diameter range Ø 0.15 to 0.80 mm
Wire infeed speed max. 120 m/min.